Part 3 bath unit and mold

Overall, roughly put, a shower of water, while the cleaning lightly, I should be lowered as soon as the temperature in the unit bus.
By doing this, it is possible to clean and shower bubbles, soap scum, and red, dirt, I'm not eliminate any food for mold.
Then, the mold is less likely to work by lowering the temperature.
That your bath, sink with water in the unit bus is that it is very good, it becomes the cause of the mold as it is, also, and thus to retain the moisture.
So, let's wipe the water firmly wall and ceiling.
I think the bus unit so it's not high ceilings, ceiling and many people on their own, I may want to use a tool such as a wiper.
Etc., and turn aside the case in order to eliminate all the moisture of the unit bus, or left open for a while the door, a window, a ventilation fan, we shall be devised in order to dry.
I had to turn the ventilation fan in the unit bus by the way.
You can get rid of the moisture quickly with this.
If someone living alone who was better, it would also be good to leave the door open at all times of the bus unit.
My room, leave always remain vacated, also turned ventilator.
In this way, also suppressed the occurrence of mold, because mold has also reduced the number of clean, by all means, please try.
I think less people then, because there are many types that can not be re-boil the bus unit, leave the hot water reservoir.